How to stay away from the shower room "self-destruction" hidden danger?

[China Glass Network] It is a choice of many families to use the shower room to make the bathroom dry and wet. The small palace that was busy in the decoration of the wedding room was also chosen this way, but there was something wrong with the purchase of the shower room.

Komiya told reporters that after entering the shower room store, I saw all kinds of "almost like" shower rooms, "stupid", I don't know how to buy. In addition, because there are a lot of news about the shower room "self-destruction" on the Internet, Komiya is very worried about this.

In order to help the small palace smoothly select a suitable and safe shower room, the reporter interviewed a number of brand shower room owners, summed up the three-point purchase.

Check if the glass is transparent

See if the glass is transparent

A shower room is basically made of glass, and the quality of the glass directly determines the quality and safety of the shower room.

First, see if the glass is transparent, with or without noise and bubbles. It is reported that if the material of the glass is impure or the defects of the process, the glass will have nodes and bubbles, thereby reducing the mechanical strength of the glass.

Secondly, check whether the original glass film has 3C mark certification. 3C certification is a compulsory product certification in China. If the shower room product does not have this certification, it cannot be sold.

Later, at the time of purchase, you can request to view the "completely tempered glass fragments model". According to the national standard, the tempered glass should have more than 60 pieces per 50*50mm area. Usually there will be a place in the shower room.

During the interview, most people in the industry told reporters that consumers are advised to purchase glass from Guangdong.

Press test for aluminum

Check whether the thickness and hardness of aluminum are up to standard

Aluminum plays a supporting role in the construction of the shower room, and often needs to support the weight of tens of kilograms of glass. If the hardness and thickness are not good, the life of the shower room will be shortened and the safety accident will be easily induced.

It is reported that the thickness of the qualified shower room aluminum is above 1.2mm, and the thickness of the aluminum glass on the upper rail is required to be 1.5mm or more. Regarding the hardness of aluminum, the insiders pointed out that the hardness of the qualified shower room aluminum should be at least 12 degrees, and the hardness of the high quality shower room aluminum is usually 13 degrees - 14 degrees.

Insiders told reporters that the hardness of aluminum can be tested by hand pressing aluminum frame, usually aluminum with a hardness of 13 degrees or more is difficult to deform if pressed by hand.

During the interview, the reporter also learned that some aluminum products sold in the market are products of secondary processing of scrap aluminum. For this reason, you must pay special attention to the appearance of aluminum when purchasing, to see if the surface is smooth or not. Chromatic aberration and trachoma, as well as profile finish. If the second-hand used aluminum is reused, the surface will have obvious chromatic aberration and trachoma, and the profile of the profile will be dark.

The performance of the pulley is also critical

See if the hardware is qualified

In addition to glass and aluminum, the hardware also directly determines the quality of a shower room. The hardware involved in the shower room is pulleys, drawbars, wall clamps, etc.

Regarding the pulleys, industry insiders pointed out that it is necessary to choose pulleys that use pressure-resistant and heavy-duty materials, such as 304 stainless steel and high-end synthetic materials. When purchasing, be sure to check the sealing performance of the pulley bearing. If the sealing of the bearing is not good, the water vapor is easy to enter the wheel, and the smoothness of the wheel will not be guaranteed. In addition, it is necessary to ensure that the pulley and the track are tightly fitted and the gap is small enough, so that it is not easy to fall off when subjected to an external force to avoid a safety accident.

The tie rod is an important support for ensuring the stability of the frameless shower room. The hardness and strength of the tie rod are an important guarantee for the impact resistance of the shower room. Insiders pointed out that consumers are advised not to buy flexible pull rods with weak strength.

The wall clamp is used as a material for connecting the shower room to the wall. Because the inclination of the wall and the offset of the installation are likely to cause the glass of the wall to be twisted, the glass self-explosion occurs. Therefore, the wall clamp should have a vertical and horizontal adjustment function to eliminate the twisting force on the glass, thereby avoiding glass self-explosion.

Insiders pointed out that in addition to ensuring the above points, when purchasing, you should go to the regular store to choose a brand enterprise, and check whether there are various types of testing reports. In addition, when door-to-door installation, it is necessary to repeatedly confirm whether the goods delivered to the door are the same as those seen in the store.

Disposable Nonwoven Shoe Cover

Disposable Shoe Covers,Nonwoven Shoe Cover Fabric,Low Weight Shoe Cover Cloth,Shoe Cover Non-Woven Fabric

Changzhou Shengqiang Textile Factory , https://www.czsqfz.com